Indane

Indane
Names
	Preferred IUPAC name 2,3-Dihydro-1H-indene
	Other names Indan; Benzocyclopentane; Hydrindene; 2,3-Dihydroindene
Identifiers
CAS Number	496-11-7 ;
3D model (JSmol)	Interactive image;
Beilstein Reference	1904376
ChEBI	CHEBI:37911 ;
ChEMBL	ChEMBL370687 ;
ChemSpider	9903 ;
ECHA InfoCard	100.007.105
Gmelin Reference	67817
PubChem CID	10326;
UNII	H9SCX043IG ;
CompTox Dashboard (EPA)	DTXSID4052132 ;
	InChI InChI=1S/C9H10/c1-2-5-9-7-3-6-8(9)4-1/h1-2,4-5H,3,6-7H2 Key: PQNFLJBBNBOBRQ-UHFFFAOYSA-N ; InChI=1/C9H10/c1-2-5-9-7-3-6-8(9)4-1/h1-2,4-5H,3,6-7H2 Key: PQNFLJBBNBOBRQ-UHFFFAOYAW;
	SMILES c1ccc2c(c1)CCC2;
Properties
Chemical formula	C9H10
Molar mass	118.176 g/mol
Appearance	colorless liquid
Density	0.9645 g/cm3
Melting point	−51.4 °C (−60.5 °F; 221.8 K)
Boiling point	176.5 °C (349.7 °F; 449.6 K)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). verify (what is ?) Infobox references

Indane or indan is an organic compound with the formula C₉H₁₀. It is a colorless liquid hydrocarbon. It is a petrochemical, a bicyclic compound. It occurs at the level of about 0.1% in coal tar. It is usually produced by hydrogenation of indene.

Names


Preferred IUPAC name 2,3-Dihydro-1H-indene
Other names Indan Benzocyclopentane Hydrindene 2,3-Dihydroindene
Identifiers
CAS Number	496-11-7^Y
3D model (JSmol)	Interactive image
Beilstein Reference	1904376
ChEBI	CHEBI:37911^Y
ChEMBL	ChEMBL370687^Y
ChemSpider	9903^Y
ECHA InfoCard	100.007.105
Gmelin Reference	67817
PubChem CID	10326
UNII	H9SCX043IG^Y
CompTox Dashboard (EPA)	DTXSID4052132
InChI InChI=1S/C9H10/c1-2-5-9-7-3-6-8(9)4-1/h1-2,4-5H,3,6-7H2^Y Key: PQNFLJBBNBOBRQ-UHFFFAOYSA-N^Y InChI=1/C9H10/c1-2-5-9-7-3-6-8(9)4-1/h1-2,4-5H,3,6-7H2 Key: PQNFLJBBNBOBRQ-UHFFFAOYAW
SMILES c1ccc2c(c1)CCC2
Properties
Chemical formula	C₉H₁₀
Molar mass	118.176 g/mol
Appearance	colorless liquid
Density	0.9645 g/cm³
Melting point	−51.4 °C (−60.5 °F; 221.8 K)
Boiling point	176.5 °C (349.7 °F; 449.6 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Y verify (what is ^YN ?) Infobox references